Concrete Contractors in Kenner, LA

What concrete services are available in Kenner?

New Orleans Concrete Contractors handles the full range of residential and commercial flatwork across Kenner and the surrounding Jefferson Parish corridor.

Residential concrete work in Kenner

Residential services include driveway replacement and new pours, patio slabs, walkways, garage floors, and steps. A standard Kenner driveway replacement covers 400 to 700 square feet and takes two to three days from demo to finishing. Patio slabs run 200 to 600 square feet depending on lot coverage. Every residential pour includes control joints cut within 12 hours to manage shrinkage cracking in the humid climate.

Commercial concrete work in Kenner

Commercial services cover parking lots, loading docks, equipment pads, and site flatwork. Commercial slabs on Kenner's alluvial ground are typically specified at 6 inches of 4000 PSI concrete with #4 rebar on 12-inch centres, reflecting the higher load and the compressible subgrade. Site drainage fall is designed into every commercial layout before forming begins.

What do Kenner ground conditions mean for concrete work?

Kenner sits on soft alluvial clay and organic silt deposited by the Mississippi River over thousands of years. This material compresses slowly and unevenly as organic content decomposes and as moisture levels fluctuate with the seasons and with pumping cycles. The water table sits 2 to 5 feet below grade across most of the city, which means subgrade soil stays near saturation for much of the year.

Why Kenner slabs settle and how the work changes

A slab poured directly over native Kenner clay without a prepared base will lose support underneath as the clay consolidates. The slab does not drop uniformly. The edges and corners go first, producing the characteristic raised centre and cracked perimeter visible on older driveways throughout the city. The mechanism is differential settlement, not surface cracking from traffic load.

Correcting for this ground requires three things. First, a compacted base of 6 inches of crushed limestone or coarse sand replaces the top of the native clay, giving the slab a stable, draining platform. Second, slab thickness increases to 5 inches for residential driveways and 6 inches for anything carrying vehicle loads heavier than a passenger car. Third, reinforcement changes from the 6-by-6 wire mesh common in drier markets to deformed #4 rebar on 18-inch centres, which holds the slab together as a unit if minor movement does occur beneath it. A 6-mil poly moisture barrier between the base and the concrete reduces capillary moisture migration into the slab from below, which matters when the water table is 2 feet down.

Drainage grading is equally important. A Kenner slab needs a minimum 1.5 percent fall away from the structure so standing water does not pond against the edge and saturate the base over time. These are not upgraded options on a Kenner pour. They are the baseline spec.

What does concrete work cost in Kenner?

Concrete work in Kenner costs more per square foot than equivalent work on stable ground because the subgrade preparation is heavier. The 2026 ranges below reflect Jefferson Parish labour and material rates and include the base work described above.

2026 cost ranges for common Kenner concrete projects

Four factors move the number on any Kenner project: the depth of subgrade repair required after demo, whether the existing base material can be recompacted or must be replaced, the reinforcement spec driven by load class, and access constraints that affect concrete truck placement. A driveway with 3 inches of settled base that needs full excavation costs more than one where the existing gravel base is sound and only needs compaction.

What permits and approvals does Kenner concrete work require?

Flatwork permit requirements in Kenner are set by Jefferson Parish Department of Inspection and Code Enforcement. Permit review is generally triggered by work that adds new impervious surface, alters site drainage patterns, touches the public right-of-way, or falls within a designated flood zone. Replacing an existing driveway in kind at the same footprint tends to follow a different path than expanding coverage or changing grade.

Flood-zone considerations are relevant across much of Jefferson Parish. Work that changes how water drains off a property can require documentation before a permit is issued. Confirm the current requirements, any applicable fees, and whether your specific project triggers review directly with Jefferson Parish Department of Inspection and Code Enforcement before work begins.

Recent concrete projects in Kenner

Driveway replacement, east Kenner

Driveway replacement, 580 square feet. The original 1990s slab had dropped 2.5 inches at the garage apron where the underlying clay had consolidated beneath a shallow, uncompacted fill. The entire slab was removed, the subgrade excavated an additional 4 inches, and 6 inches of crushed limestone was compacted in two lifts before forming. Poured at 5 inches of 3500 PSI concrete with #4 rebar on 18-inch centres and a 6-mil poly barrier. Broom finish, control joints at 10-foot intervals. Completed in three days.

Rear patio slab, central Kenner

New patio slab, 320 square feet. The existing grade drained toward the house foundation, and the native clay subgrade was saturated from a blocked perimeter drain. Subgrade was excavated to 8 inches, perimeter drainage re-routed, and 6 inches of coarse sand base compacted before the form was set with a 2 percent fall away from the structure. Poured at 4 inches of 3500 PSI concrete with 6-mil poly and #3 rebar on 18-inch centres. Salt finish. Completed in two days.

How do you get a concrete estimate in Kenner?

A free on-site estimate takes 20 to 30 minutes. During the visit, the subgrade condition is assessed, existing drainage fall is measured, and any demolition scope is confirmed. A written itemised quote covering base work, concrete spec, reinforcement, finish and control joint layout is provided within 24 hours of the visit. Call or submit the contact form to schedule.